Cycle Stop Valves

Pump System Questions and Answers => Frequently Asked Questions => Topic started by: killick on May 10, 2016, 08:21:39 PM

Title: Model PK1A use with a small pump
Post by: killick on May 10, 2016, 08:21:39 PM

I would like to use a PK1A with a small 1/2 HP centrifugal pump that will only develope a maximum pressure of 50psi. Is that possible?

Title: Re: Model PK1A use with a small pump
Post by: Cary Austin on May 11, 2016, 07:46:02 AM

Yes if you set the CSV at 30 and use a 20/40 pressure switch setting.