Author Topic: Pressure reducing valves  (Read 3114 times)

jf

  • Newbie
  • *
  • Posts: 1
    • View Profile
Pressure reducing valves
« on: July 09, 2018, 03:26:38 PM »
We are installing a tank, pump, pressure tank, and cycle stop valve for a drip irrigation system of varying elevation.  Do we need to have pressure reducing valves on each leg or can the cycle stop valve act as a pressure reducing valve?

jf

Cary Austin

  • Inventor, Owner, Chief Cook and Bottle Washer
  • Administrator
  • Newbie
  • *****
  • Posts: 1586
    • View Profile
    • http://www.cyclestopvalves.com
Re: Pressure reducing valves
« Reply #1 on: July 10, 2018, 07:02:43 AM »
Normally the pump runs at 40/60 with a CSV set for 50 PSI constant, and then you use a 15 PSI regulator on the line to the drip.  But you can set the CSV1A as low as 15 PSI, and with a 10/30 pressure switch it could do the whole job for you if drip is the only thing on the system.

WarnerThurn

  • Newbie
  • *
  • Posts: 2
    • View Profile
Pressure reducing valves
« Reply #2 on: December 24, 2018, 10:40:30 AM »
Why is there 2 pressure valves on each side? Cant find any information about this? One is the normal in Line type of valve and the other has a bleed nipple on it.

Cary Austin

  • Inventor, Owner, Chief Cook and Bottle Washer
  • Administrator
  • Newbie
  • *****
  • Posts: 1586
    • View Profile
    • http://www.cyclestopvalves.com
Re: Pressure reducing valves
« Reply #3 on: December 24, 2018, 02:33:17 PM »
I am guessing you are talking about a check valve.  Picture maybe?