Cycle Stop Valves
Pump System Questions and Answers => Pumps, Wells, Tanks, Controls => Topic started by: kirkdj on April 17, 2013, 02:17:56 PM
-
Ok.....well got the Gould 10LS10422C pump installed .............I know these pump savers are good to have.... without spending a fortune can anyone recommend one.....extra features are nice on these, but my main concern is protecting the pump at a reasonable price.....or is the product line offered by Gould the way to go? This unit will be inside in the basement by the pump switch I guess...
I also so that Gould has some pump control boxes......what exactly is included in these? is it simply a control relay or more to it?
-
If it is a 2 wire motor, (2 hots and a ground) you don’t need a control box. If it is a 3 wire motor, (3 hots and a ground) you will need the matching control box just to make it work.
The Cycle Sensor seen at this link
http://www.cyclestopvalves.com/prod_sensor.html
is the pump protector I recommend. And is about the only one sensitive enough to work with the low amps from a pump with a Cycle Stop Valve.