Cycle Stop Valves

Pump System Questions and Answers => Pumps, Wells, Tanks, Controls => Topic started by: JohnD on April 12, 2017, 02:11:58 PM

Title: Pump to T that branches to pressure tank and outlets
Post by: JohnD on April 12, 2017, 02:11:58 PM

I have a  CSV1A  installed on my home system and it works great.  I have a well pump and pressure tank at my dock on the lake and figured to put in a CSV125-1 (60psi) to steady the flow for an irrigation system.  The dock installation for the pressure tank is different however, so am not sure if I can install the valve or I need to replumb from the pump.  Pipe comes comes from the pump to a T, one side of the T goes up to the pressure tank and the other side heads to the water outlets.  Can I install the CSV between between the pump and the T or do I need to reconfigure so that water goes from the pump to the pressure tank and then the outlets?  Thanks for your help.

Title: Re: Pump to T that branches to pressure tank and outlets
Post by: Cary Austin on April 12, 2017, 04:27:48 PM

Yes you can put the CSV125 before the first tee.  That CSV125 can even be submerged. 

Title: Re: Pump to T that branches to pressure tank and outlets
Post by: JohnD on April 12, 2017, 04:45:36 PM

Thank you!