Cycle Stop Valves
Pump System Questions and Answers => Applications => Topic started by: InfantryYJ on June 05, 2021, 07:45:47 AM
-
My current set up is that the outside spigots are branched so that they do not go through the home water filter.
The line from the submersed pump comes into the house, then is T'd off to feed the outside spigots and the line then continues to the pump switch and pressure tank.
Should I mount the valve and small tank before the T?
On the attached picture, the "red" arrow is coming from the pump, the "blue" arrow goes to my outside spigots, and the "green" arrow continues to supply the house.
Thanks
-
Yes, put the CSV where the red arrow is.
-
Thank you
-
I've had mixed feelings about the online casino australia pokies (https://au-onlinepokiess.com/). Struggled to find one that fits my vibe, but I ended up enjoying a few games. Anyone else in the same boat? Reckon amenities can often make these experiences better, even if it's just online.