Cycle Stop Valves

Pump System Questions and Answers => Valve Tech => Topic started by: stvnwhite on May 07, 2023, 03:18:38 PM

Title: Pipe Diameter Change
Post by: stvnwhite on May 07, 2023, 03:18:38 PM

Hello -

I have 1" line coming off my submersible but 1-1/4" line on distribution lines.  During an initial piping setup, does the CSV care if I go directly into it with 1" (internal threads) and exit with 1-1/4" (using the external threads) or should I transition farther from the valve itself ?    If so, on the upstream or downstream side of the valve?

Thanks

Title: Re: Pipe Diameter Change
Post by: Cary Austin on May 09, 2023, 04:33:00 PM

The CSV1A is dual threads so you can do just that.  Use either thread on either end.  Enjoy!