Cycle Stop Valves

Pump System Questions and Answers => Valve Tech => Topic started by: BillG on February 03, 2024, 11:50:02 AM

Title: CSV1A unknown issue
Post by: BillG on February 03, 2024, 11:50:02 AM

Hello,
My CSV1A is NOT functioning as it was. The CSV1A  mimics the pressure switch regardless of increasing or decreasing psi with the stem bolt on top.

Pressure tank is fine.
Pressure switch cuts in at 40psi and cuts off at 60psi.
Cycle stop valve follows the pressure switch meaning it does not idle at 50psi , My inlet gauge reads the same as my pressure switch gauge.

Please advise.

Thank you

Title: Re: CSV1A unknown issue
Post by: Cary Austin on February 05, 2024, 06:52:30 AM

Please call if you haven't done so already.  Sounds like something is not right.  806 885 4445