Cycle Stop Valves
Pump System Questions and Answers => Irrigation => Topic started by: Bayou Bengal on March 22, 2026, 10:02:34 AM
-
I have a golf course irrigation system with 2 pumps and a cycle stop setup for each. My issue is one of my pumps (15hp) is putting too much pressure on the header causing the system to trip. I have adjusted the regulator in both directions but have no control of the pressure. This system was installed by a contractor in 2011 and this is the first time we have had this trouble. Only knowledge I have of any of this is what I "think" I have figured out. The bladder and spring appear to be in great condition. No holes or wear spots. Spring is still strong. Could the regulator be my problem? I am leaning to this because I get no reaction from pressure gauge when I open or close back on the regulator. Using CSV 3 B 150 regulator.
Thanks in advance for any help.