Cycle Stop Valves

Pump System Questions and Answers => Reviews => Topic started by: Cary Austin on September 21, 2014, 10:51:18 AM

Title: Doug Stewart river pumps
Post by: Cary Austin on September 21, 2014, 10:51:18 AM
Pump stations by Doug Stewart for raw water supply from river to treatment plant.

These are the 3 Goulds 40HP 12" Turbine River Pumps w/ 44FT Shafts in a 50FT Wet Well.
The CSV's are obvious!!!!!! Each Pump does 515US GPM @100PSI Shut off was proved at

140PSI. There is a 120Gal Goulds Pr Tank in corner.

The CSV's will Hols aprox 20PSI at the Inlet to the Water Treatment Plant. Only 2 Pumps will
run at once w/ 3 Pump alternating together (one off until they start again)
Doug

Doug Stewart
Direct: 780-263-5583
Fax: 780-988-0519
E-Mail: d.stewart@revampindustries.ca
 
DS Pumps Inc.
4823, 99th Street
Edmonton, Alberta.
T6E 4Y1

(http://i57.tinypic.com/2vmcx95.jpg)

(http://i58.tinypic.com/29nghh3.jpg)