Cycle Stop Valves

Pump System Questions and Answers => Frequently Asked Questions => Topic started by: mountainmule on April 30, 2015, 03:35:50 PM

Title: The Cycle Stop Valve model CSV1A or CSV2W or?
Post by: mountainmule on April 30, 2015, 03:35:50 PM

My pump is 33GPM, 2.0HP, 230V, Submersible,

Which valve would you recommend?

Title: Re: The Cycle Stop Valve model CSV1A or CSV2W or?
Post by: Cary Austin on April 30, 2015, 03:52:59 PM

Over 25 GPM the CSV2W is needed.  It works from 5 to 50 GPM.

Title: Re: The Cycle Stop Valve model CSV1A or CSV2W or?
Post by: mountainmule on April 30, 2015, 11:13:17 PM

Would this one work also? If so, do they work as well as the CSV2W?

Title: Re: The Cycle Stop Valve model CSV1A or CSV2W or?
Post by: Cary Austin on May 01, 2015, 07:01:26 AM

If you are talking about the CSV125, then yes it will work as well.  These valves just need to be installed in the well or in a place where a small drip won't hurt anything.  Other than that they actually work better than the metal valves.

Title: Re: The Cycle Stop Valve model CSV1A or CSV2W or?
Post by: mountainmule on May 01, 2015, 10:14:30 AM

Thank You for your help and time Cary!

I ordered the CSV12550-1.

Title: Re: The Cycle Stop Valve model CSV1A or CSV2W or?
Post by: enakawat on April 02, 2016, 06:11:02 AM

i have the same proble too, i'll order the same csv125. thx