Cycle Stop Valves

Pump System Questions and Answers => Valve Tech => Topic started by: valley ranch on September 24, 2016, 10:49:38 AM

Title: What model CSV should I use?
Post by: valley ranch on September 24, 2016, 10:49:38 AM

Working on our water system now. The Bladder had gone out of the pressure tank, the pump had over Cycled, the capacitor had failed and the pressure switch had burned.

I've replaced the control box, and the pressure switch and plan today to replace the tank.

I want to install a CSV.

Question: Which model?

There are 4 in the single family, we water our trees and lawns daily during, except in winter, with an automatic sprinkler system with 6 zones.
I think, our 1hp pump puts out 10gpm.

It would be nice if we can use a lower priced unit, we have three properties with wells.

Thank you

Richard

Title: Re: What model CSV should I use?
Post by: Cary Austin on September 25, 2016, 08:53:58 AM

With a 1hp, 10 gpm pump the CSV125 should be fine.