Cycle Stop Valves

Pump System Questions and Answers => Pumps, Wells, Tanks, Controls => Topic started by: henjj on January 18, 2018, 06:23:48 PM

Title: Cycle Sensor question
Post by: henjj on January 18, 2018, 06:23:48 PM

I just installed a cycle stop valve along with a cycle sensor.  I think I got everything installed right.  My questions is this:  is it normal for the cycle sensor to show .05 after the pressure tank is full and the pressure switch turns the pump off?

Title: Re: Cycle Sensor question
Post by: Cary Austin on January 19, 2018, 08:55:21 AM

Yes.  it is still picking up a little stray voltage off the line.  That number will change a little some times but it perfectly normal.