Cycle Stop Valves
Pump System Questions and Answers => Pumps, Wells, Tanks, Controls => Topic started by: barngal on August 16, 2020, 09:21:39 AM
-
Please excuse my lack of knowledge here, I appreciate your help.
I have a submersible pump at around 120' deep.
The plumbing into and out of the current tank is 2" galvanized.
I'm concerned about plumbing my 1 1/4" PK125 between the 2 2" galvanized pipes.
Is this going to create a problem?
-
The pipe size doesn't matter. But it is very unusual to have 2" pipe to the tank. 1 1/4" is more common, as that is the size of the tank inlet/outlet.