Cycle Stop Valves
Pump System Questions and Answers => Frequently Asked Questions => Topic started by: jps32 on May 24, 2021, 05:08:21 PM
-
Looking to purchase a CSV, what will work best for my current setup? I have a submersible well pump 40/60 psi, id like to use my current pressure tank if possible and would like to know the best location for the CSV.
Also interested in the best location on my current setup or suggestions to help facilitate the install? thanks!
John
-
Just put the CSV1A before the brass tank cross. it can go on the tank cross and reattach the black pipe. Or you can just cut the black pipe and use insert fittings to install the CSV1A in the pipe before the brass tank cross.