Cycle Stop Valves

Pump System Questions and Answers => Pumps, Wells, Tanks, Controls => Topic started by: jark0218 on November 14, 2021, 03:30:28 PM

Title: Low pressure issues
Post by: jark0218 on November 14, 2021, 03:30:28 PM

I currently have a CVS1A setup but am experiencing very low pressure throughout the house.  Basically we can only use one fixture at a time.  I have a 305' well with a Goulds 3/4 hp 7 GPM series pump.  Based on your compatible pump types the maximum depth to water level is 215'.  Could this be the issue?  If so, do you have any suggested solutions.  Thanks

Title: Re: Low pressure issues
Post by: Cary Austin on November 14, 2021, 04:00:58 PM

What pressure is on the gauge?

Title: Re: Low pressure issues
Post by: jark0218 on November 15, 2021, 06:46:36 AM

Pressure gauge says 60 psi

Title: Re: Low pressure issues
Post by: Cary Austin on November 16, 2021, 08:28:43 AM

With 60 PSI you would not even need soap in the shower it would be so strong.  You must have a blockage after the gauge.  Do you have a filter clogged or a valve partially closed?

Title: Re: Low pressure issues
Post by: jark0218 on November 16, 2021, 06:17:48 PM

Yes filter was clogged.  Issue solved!  Thanks!