Show Posts
1
Pumps, Wells, Tanks, Controls / Re: CSV with VFD
« on: September 14, 2012, 08:08:28 AM »
Tanks for the help.
I am using a CSV1A and I have a Franklin Monodrive that is not presently connected. If I understand well I can use the mono for soft start and this is what I want to do. The pressure switch (that they call a censor but it is not, it is a low pressure switch) is adjusted at 60 psi which mean that the motor will start at 59 psi if I understand correctly. Presently the CSV1A is adjusted at 50 psi and I am using a standard 40-60 pressure switch and a control box to start the pump motor. If I want to use the Franklin what would be your settings recommendations for the Mono sensor and the CSV1A? I do not understand how I can use the mono which has only 1 psi deferential pressure between start and stop.
I am using a CSV1A and I have a Franklin Monodrive that is not presently connected. If I understand well I can use the mono for soft start and this is what I want to do. The pressure switch (that they call a censor but it is not, it is a low pressure switch) is adjusted at 60 psi which mean that the motor will start at 59 psi if I understand correctly. Presently the CSV1A is adjusted at 50 psi and I am using a standard 40-60 pressure switch and a control box to start the pump motor. If I want to use the Franklin what would be your settings recommendations for the Mono sensor and the CSV1A? I do not understand how I can use the mono which has only 1 psi deferential pressure between start and stop.