Messages

1

Applications / Re: CSV1A or CSV2W better for my application?

« on: May 06, 2021, 11:38:04 AM »

I’m having a hard time finding barbed fittings for the CTS poly I have ordered, and from what I’ve read CTS requires Ford or similar fittings. The guys at the waterworks store suggested the Mueller h-15451 and some nipples and bushings to adapt the 1-1/4 pitless to my 1-1/2 poly.  I ordered the poly from Home Depot and kinda regretting getting the CTS. I haven’t picked it up yet and I’m considering returning it..but it was almost impossible to find IPS in the length I need locally and the cost was substantialy more.

The switch and tank will be at the top of the hill and will eventually be in the garage of our new house.

2

Applications / CSV1A or CSV2W better for my application?

« on: May 05, 2021, 04:52:25 PM »

Hello

I have a Grundros 16S15-14 set at 150’ going into 1-1/2 cts poly traveling 500ft and about 50ft up in elevation to where I’m setting up temporary water for construction. I was planning on setting up a well X trol wx-202xl with a 40/60 switch. I would like to also incorporate a CSV into the system. Can you recommend which one? What kind of pressure should I expect at the pitless when the CSV is holding my pump back to 1gpm? I think the compression fittings for the poly are only rated at 125psi. Thanks