1
Valve Tech / CSV125, 60-1 Not Working
« on: June 10, 2018, 12:10:02 PM »
CSV125 doesn't seem to be working.
Yesterday I installed the CSV125, 60-1 into my well pump circuit. BUT it doesn't seem to be working. Pump circuit continues to cycle (between 50-70psi), even with 4 gpm sprinkler running. Any help would be appreciated. Photo attached of the install.
I had to move my pump switch port closer to the bladder tank, because the switch began to quickly toggle on and off after the install.
I ended up reducing my switch settings (from 60-80), down to 50-70 for the 60 psi CSV. Bladder tank is set at 45 psi.
Yesterday I installed the CSV125, 60-1 into my well pump circuit. BUT it doesn't seem to be working. Pump circuit continues to cycle (between 50-70psi), even with 4 gpm sprinkler running. Any help would be appreciated. Photo attached of the install.
I had to move my pump switch port closer to the bladder tank, because the switch began to quickly toggle on and off after the install.
I ended up reducing my switch settings (from 60-80), down to 50-70 for the 60 psi CSV. Bladder tank is set at 45 psi.