« previous next »
Pages: [1]

Author Topic: Drilling vent hole  (Read 4738 times)

mountainmule

  • Newbie
  • *
  • Posts: 5
    • View Profile
Drilling vent hole
« on: July 08, 2016, 06:09:06 PM »
I just got a new CSV12560-1 and need to drill the vent hole, could you tell me where, how etc. Thank you
Report to moderator   Logged

Cary Austin

  • Inventor, Owner, Chief Cook and Bottle Washer
  • Administrator
  • Newbie
  • *****
  • Posts: 1599
    • View Profile
    • http://www.cyclestopvalves.com
Re: Drilling vent hole
« Reply #1 on: July 08, 2016, 08:48:31 PM »
One eighth to one quarter.
Report to moderator   Logged

mountainmule

  • Newbie
  • *
  • Posts: 5
    • View Profile
Re: Drilling vent hole
« Reply #2 on: July 08, 2016, 11:16:16 PM »
Thank You,

MM
Report to moderator   Logged

valley ranch

  • Newbie
  • *
  • Posts: 3
    • View Profile
Re: Drilling vent hole
« Reply #3 on: September 24, 2016, 12:17:30 PM »
Hi, May I ask what is the vent hole for. Is it required? 

and Is there any reason the CSV 12560 can't be installed horizontal out side the well casing?

Thanks
« Last Edit: September 24, 2016, 12:20:29 PM by valley ranch »
Report to moderator   Logged

Cary Austin

  • Inventor, Owner, Chief Cook and Bottle Washer
  • Administrator
  • Newbie
  • *****
  • Posts: 1599
    • View Profile
    • http://www.cyclestopvalves.com
Re: Drilling vent hole
« Reply #4 on: September 25, 2016, 09:02:00 AM »
The vents on the CSV125 were made larger in May 2016.  Before that we use to drill a larger vent if the valve was going to be submerged or packed with iron.  Drilling a larger vent is no longer needed.  And yes the CSV125 can be installed outside the well.
Report to moderator   Logged
Pages: [1]
« previous next »