Author Topic: CSV1A unknown issue  (Read 637 times)


  • Newbie
  • *
  • Posts: 1
    • View Profile
CSV1A unknown issue
« on: February 03, 2024, 11:50:02 AM »
My CSV1A is NOT functioning as it was. The CSV1A  mimics the pressure switch regardless of increasing or decreasing psi with the stem bolt on top.

Pressure tank is fine.
Pressure switch cuts in at 40psi and cuts off at 60psi.
Cycle stop valve follows the pressure switch meaning it does not idle at 50psi , My inlet gauge reads the same as my pressure switch gauge.

Please advise.

Thank you

Cary Austin

  • Inventor, Owner, Chief Cook and Bottle Washer
  • Administrator
  • Newbie
  • *****
  • Posts: 1586
    • View Profile
Re: CSV1A unknown issue
« Reply #1 on: February 05, 2024, 06:52:30 AM »
Please call if you haven't done so already.  Sounds like something is not right.  806 885 4445