Messages

1

Applications / Re: In well csv

« on: June 26, 2024, 09:44:20 PM »

I’m supposed to receive my CSV-125 this week. I looked up the spec on my well pump and it states that it has a max operating pressure of 217 psi. I have a grundfos 10SQE05-160 well pump that is pushing about 40 ft of head pressure. What would you recommend to ensure I don’t over pressure the csv?

I was also looking at the pressure rating on my well pipe and I think the poly pipe is only rated for 100 psi. What do you recommend for plumbing pipie from the pump to the csv?

2

Applications / Re: In well csv

« on: September 16, 2023, 06:40:51 AM »

Awesome! That should work perfect. I’m thinking of ordering the 60 psi valve. Right now my pump switch is set for 40/60. I’m guessing that I’ll have to adjust it up to 65?

3

Applications / In well csv

« on: September 13, 2023, 08:20:27 PM »

I’ve been looking at either converting my well pump to a vfd or installing a csv. The issue that I’m running in to is that my well supplies my house and my workshop and they are connected underground just outside the well casing. In order for the csv to work for me I believe I have to have it installed between the pump and the tee that joins the two water lines to the casing outlet. Is there a csv available that will fit in a 4” well casing?