« previous next »
Pages: [1]

Author Topic: Adding more pressure to current installed cycle stop valve  (Read 660 times)

Crazywade

  • Newbie
  • *
  • Posts: 2
    • View Profile
Adding more pressure to current installed cycle stop valve
« on: May 30, 2024, 01:27:39 PM »
Hello, I have had a csv for about 8 years. Just switched out a bad pressure tank(10gal). The CVS holds pressure around 60psi shuts down at 70 psi and cuts off at 40psi. I was considering bumping the pressure up a few psi
For more pressure in shower on 2nd floor.
Do I need to start from the beginning,  (back out adjusting stud out all the way) or can I just turn it from where it is until I get a few psi increase .
Thanks for any help.
Sean
Report to moderator   Logged

Cary Austin

  • Inventor, Owner, Chief Cook and Bottle Washer
  • Administrator
  • Newbie
  • *****
  • Posts: 1599
    • View Profile
    • http://www.cyclestopvalves.com
Re: Adding more pressure to current installed cycle stop valve
« Reply #1 on: June 01, 2024, 05:33:22 PM »
Turn the pressure switch up first. With switch shutting off at 80 you can just tighten CSV adjustment until it holds 70.
Report to moderator   Logged

Crazywade

  • Newbie
  • *
  • Posts: 2
    • View Profile
Re: Adding more pressure to current installed cycle stop valve
« Reply #2 on: June 03, 2024, 10:34:57 AM »
Great
, Thank you
Report to moderator   Logged
Pages: [1]
« previous next »