Messages

1

Frequently Asked Questions / Re: Low pressure on guage

« on: June 13, 2022, 09:38:42 AM »

I was running one water hose off the hose bib to a rotary type sprinkler. The hose bib is located a few inches downstream from the CSV and pressure switch.

I'll have to do a bucket test I guess to determine my flow rate.

2

Frequently Asked Questions / Low pressure on guage

« on: June 12, 2022, 03:21:41 PM »

I am running a 30/50 pressure switch and ordered the CSV preset for 40psi...when running water from the well, the pressure stays at about 34psi until the water is shut off then the pressure on the guage increases to just under 50psi.

Do I simply need to adjust the CSV?

3

Frequently Asked Questions / Fittings coming off valve to tee for PRV and pressure gauge

« on: May 30, 2022, 11:05:11 AM »

I am having trouble finding the SS fittings to come off the CSV to tee off to mount the pressure guage and the pressure relief valve...Where can I find them?

Do you sell these fittings alone, without the tank, prv, etc?