A lot of people are using that 1HP, 33 GPM pump because of such a good price. It is a little overkill, but over-sized pumps are what a CSV is made to fix. The CSV1A as comes in the PK1A kit will make that pump work from 1 GPM to about 15-30 GPM. You may never use 25 GPM, which is OK, because the CSV will make that big pump work like a small pump or large pump as needed.
That pump has a max head of 207', which is 89 PSI. You will lose 3-5 PSI of that lifting from 10' or so. With a pump that has a max pressure of say 85 PSI, I would not run the pressure switch any higher than 55/75, and 50/70 would be better. You need at least 10 PSI difference between pump max pressure and pressure switch shut off point. A 3/4HP 0r 1/2HP, in a 10 GPM series would be closer to the size you need, but they are several times more expensive than the 1HP, 33GPM. Just let the CSV size the 1HP pump as needed.