Author Topic: Pressure rises too much after pump shutoff  (Read 1947 times)

Aikido123

  • Newbie
  • *
  • Posts: 3
    • View Profile
Pressure rises too much after pump shutoff
« on: November 02, 2020, 08:35:03 AM »
Hi,

Things seem to be working fine with my new CSV which is set for about 60 pounds of constant pressure.  The pump is cutting in at about 45 pounds and out at 70.  But after the pump cuts out, the pressure gauge gradually rises to 85-87 pounds which I'm afraid is too high.  Any ideas?  Once water is turned on, it comes down quickly and works normally.

Cary Austin

  • Inventor, Owner, Chief Cook and Bottle Washer
  • Administrator
  • Newbie
  • *****
  • Posts: 1586
    • View Profile
    • http://www.cyclestopvalves.com
Re: Pressure rises too much after pump shutoff
« Reply #1 on: November 02, 2020, 08:50:09 AM »
When the pump shuts off the pressure should stop rising.  Sometimes there is an underground pressure tank somewhere before the CSV that is increasing the pressure after the pump shuts off?

Aikido123

  • Newbie
  • *
  • Posts: 3
    • View Profile
Re: Pressure rises too much after pump shutoff
« Reply #2 on: November 10, 2020, 06:24:29 AM »
I don't have another pressure tank anywhere.
What's happening is, the pressure tank is losing the air pressure I'm pumping into it in a matter of hours.  This makes the whole system very pressure sensitive and unstable.  (I got the pressure tank new along with the csv valve). It's a PK1A PSIDE-KICK Pressure Tank Kit - 10 gallon.
I need help with this. Thanks

Aikido123

  • Newbie
  • *
  • Posts: 3
    • View Profile
Re: Pressure rises too much after pump shutoff
« Reply #3 on: November 10, 2020, 12:49:32 PM »
Soapy water is producing bubbles on the valve stem of the tank.  I'll see about a valve wrench I guess

Cary Austin

  • Inventor, Owner, Chief Cook and Bottle Washer
  • Administrator
  • Newbie
  • *****
  • Posts: 1586
    • View Profile
    • http://www.cyclestopvalves.com
Re: Pressure rises too much after pump shutoff
« Reply #4 on: November 10, 2020, 05:14:24 PM »
Unless you are adding air with a compressor after the pump shuts off, there is no way for pressure to increase.