Author Topic: Which CSV125 would work with my system?  (Read 4847 times)

zannej

  • Newbie
  • *
  • Posts: 12
    • View Profile
Re: Which CSV125 would work with my system?
« Reply #15 on: March 13, 2021, 10:55:58 PM »
Thanks, Carey. I will consult with the old lady and see what she thinks. Hopefully I'll be ordering soon.

I do have a question: If I order the CSV125 and have it with a 30/50 switch but then later go to a 40/60 switch, would I need to change anything on the CSV?

Cary Austin

  • Inventor, Owner, Chief Cook and Bottle Washer
  • Administrator
  • Newbie
  • *****
  • Posts: 1586
    • View Profile
    • http://www.cyclestopvalves.com
Re: Which CSV125 would work with my system?
« Reply #16 on: March 14, 2021, 06:59:22 PM »
You would need to change from a CSV12540-1 to a CSV12550-1.  They are not adjustable.  You can use the CSV1A and set it anywhere between 15 PSI and 150 PSI.

zannej

  • Newbie
  • *
  • Posts: 12
    • View Profile
Re: Which CSV125 would work with my system?
« Reply #17 on: March 24, 2021, 10:11:57 AM »
Oops. The 1A is the one I intended to say but I typed the wrong thing. So, there is a way to adjust the 1A? (sorry for delayed response-- been busy)

Cary Austin

  • Inventor, Owner, Chief Cook and Bottle Washer
  • Administrator
  • Newbie
  • *****
  • Posts: 1586
    • View Profile
    • http://www.cyclestopvalves.com
Re: Which CSV125 would work with my system?
« Reply #18 on: March 24, 2021, 10:30:25 AM »
Yes. Tightening the bolt on the CSV1A will increase the pressure from 15 PSI to as much as 150 PSI.  Just need to be running about 3 GPM when adjusting.

zannej

  • Newbie
  • *
  • Posts: 12
    • View Profile
Re: Which CSV125 would work with my system?
« Reply #19 on: March 29, 2021, 10:22:47 AM »
So, will it be preset to the right setting for a 30/50 though? Or would I have to specify that when ordering somehow?

Cary Austin

  • Inventor, Owner, Chief Cook and Bottle Washer
  • Administrator
  • Newbie
  • *****
  • Posts: 1586
    • View Profile
    • http://www.cyclestopvalves.com
Re: Which CSV125 would work with my system?
« Reply #20 on: March 29, 2021, 11:54:26 AM »
The CSV1A can be preset to 40 PSI if you ask for that in the notes when ordering one.  Or you can turn on a shower and adjust the bolt until it stays at 40 PSI.