« previous next »
Pages: [1]

Author Topic: gpm and sprinklers  (Read 1566 times)

rbaird

  • Newbie
  • *
  • Posts: 2
    • View Profile
gpm and sprinklers
« on: June 13, 2021, 05:15:45 PM »
If the csv is sending 1-2 gpm (I have the csv1a)  to the pressure tank, and my sprinkler zones are using 15-20gpm depending on the zone-should I place the supply for the sprinklers before the csv?
Thank you
Randy
Report to moderator   Logged

Cary Austin

  • Inventor, Owner, Chief Cook and Bottle Washer
  • Administrator
  • Newbie
  • *****
  • Posts: 1586
    • View Profile
    • http://www.cyclestopvalves.com
Re: gpm and sprinklers
« Reply #1 on: June 14, 2021, 07:36:48 AM »
No!  The CSV only sends 1 gpm to the tank AFTER you turn off all sprinklers and faucets.
Report to moderator   Logged

rbaird

  • Newbie
  • *
  • Posts: 2
    • View Profile
Re: gpm and sprinklers
« Reply #2 on: June 15, 2021, 11:28:24 AM »
sorry for my confusion but how dose the csv know the sprinklers and faucets are turned off and no longer needs to run at 20gpm
Report to moderator   Logged

Cary Austin

  • Inventor, Owner, Chief Cook and Bottle Washer
  • Administrator
  • Newbie
  • *****
  • Posts: 1586
    • View Profile
    • http://www.cyclestopvalves.com
Re: gpm and sprinklers
« Reply #3 on: June 15, 2021, 03:44:06 PM »
It knows because when you shut off the sprinklers the pressure increases above the setting of the CSV. it then closes down to 1 gpm which has no place left to go except the tank.
Report to moderator   Logged
Pages: [1]
« previous next »