Author Topic: Flooded Suction Jet Pump Setup  (Read 1318 times)

stvnwhite

  • Newbie
  • *
  • Posts: 9
    • View Profile
Flooded Suction Jet Pump Setup
« on: March 30, 2023, 11:53:38 AM »
Cary -

Planning a setup with jet pump fed by a cistern approximately 5 feet above the pump level.    Will be using a CSV and an existing Amtrol tank with about 12ish gallons of draw down volume at 40/60.    Two story residence with all other water spigots downhill.   Looking at the Goulds J5S pump or would the J5SH (or higher HP pump) be more appropriate?  I am presuming that these types of pumps would be fine with flooded suction with appropriate check valve in place.     Any other pump brands or types for this kind of application?

Thanks

Cary Austin

  • Inventor, Owner, Chief Cook and Bottle Washer
  • Administrator
  • Newbie
  • *****
  • Posts: 1601
    • View Profile
    • http://www.cyclestopvalves.com
Re: Flooded Suction Jet Pump Setup
« Reply #1 on: March 31, 2023, 09:13:00 AM »
I use the J5SH and the J15S when I want high pressure like 50/70.  Most jet pumps will work at 30/50 like the J5S and many will work with a 40/60 switch.  Not much difference in brands of jet pumps these days.  The 1HP at TC seems to be a good pump and there are others like it.

stvnwhite

  • Newbie
  • *
  • Posts: 9
    • View Profile
Re: Flooded Suction Jet Pump Setup
« Reply #2 on: March 31, 2023, 04:16:42 PM »
Sorry, TC?

Cary Austin

  • Inventor, Owner, Chief Cook and Bottle Washer
  • Administrator
  • Newbie
  • *****
  • Posts: 1601
    • View Profile
    • http://www.cyclestopvalves.com
Re: Flooded Suction Jet Pump Setup
« Reply #3 on: April 01, 2023, 08:41:47 AM »
I meant TS for tractor Supply.